HeatRay Non-Glowing Heaters can be ceiling or wall mounted, as well as incorporated into various structures such as pergolas, trellises, gazebo, marquees, conservatories, garages, sheds or other shelters, fixed awnings and commerical grade patio umbrellas. The Non-glowing vandal proof heaters are suitable for both indoor and outdoor applications.
Ceiling/Wall Mount Brackets
Non-glowing heaters can be mounted using U-shaped 'Ceiling/Wall Brackets'. These are available in a number of sizes to provide a 5", 8", 12" or 18" drop from the ceiling or an offset from the wall.
Click here to view
Ceiling Recess Unit
For areas where the ceiling is at the appropriate height, Non-glowing heaters can be mounted flush with the ceiling by utilizing 'Ceiling Recess Units'.
Click here to view
Ceiling Tube Suspension
When a ceiling is higher than 8 feet, Non-glowing heaters will need to be dropped to the optimal mounting height by implementing 'Ceiling Tube Suspension' units. The standard length of the suspension tubes is 36" and can be trimmed on-site to any shorter length.
Click here to view
Ceiling Double Tube Suspension
To allow Non-glowing radiant patio heaters to be grouped into pairs, 'Ceiling Double Tube Suspension' units are required. This system allows the paired heaters to be mounted at the optimal mounting height of 8 feet. The standard length of the suspension tube is 36" and can be trimmed on-site to any shorter length.
Click here to view
Ceiling Chain Suspension
An alternative for mounting Non-glowing heaters from high ceilings is the 'Ceiling Chain Suspension'. An electrical contractor can provide suitably rated chains, capable of holding a minimum 50 pound weight. This weight rating includes a safety factor of x2.
Integration with Heatray Umbrellas
Non-glowing heaters can be easily integrated with the entire range of our
HeatRay Heated Umbrellas. The radiant Non-glowing heaters get seamlessly attached under the arms of the patio umbrellas for optimal warmth distribution.
Click here to view
